Products
Microstrip attenuator with sleeve
Data Sheet
|
Power |
Freq.Range |
Dimension（mm） |
Attenuator Value （dB） |
Substrate |
Sleeve Material |
Data Sheet |
|
|
φ |
L |
||||||
|
2 |
DC-12.4 |
7.15 |
6.5 |
01-10，15，20，25，30 |
Al2O3 |
Al（oxidation） | RFTXXA-02TA7265-12.4 |
|
DC-18.0 |
5.4 |
3.2 |
01-10 |
Al2O3 |
Cu（Silver plating） | RFTXXA-02TA5432-18 | |
|
DC-18.0 |
5.4 |
6.4 |
15，20，25，30 |
Al2O3 |
Cu（Silver plating） | RFTXXA-02TA5465-18 | |
|
5 |
DC-12.4 |
7.15 |
6.5 |
01-10，15，20，25，30 |
BeO |
Al（oxidation） | RFTXX-05TA7265-12.4 |
|
DC-18.0 |
5.5 |
6.5 |
01-10，15，20，25，30 |
BeO |
Al（oxidation） | RFTXX-05TA5565-18 | |
|
7.15 |
6.5 |
01-10，15，20，25，30 |
BeO |
Al（oxidation） | RFTXX-05TA7265-18 | ||
|
10 |
DC-6.0 |
7.4 |
11.8 |
01-10，15，20，25，30，40 |
AlN |
Al（oxidation） | RFTXXN-10TA7412-6 |
|
7.4 |
15.9 |
01-10，15，20，25，30，40 |
AlN |
Al（oxidation） | RFTXXN-10TA7416-6 | ||
|
14.0 |
12.9 |
01-10，15，20，25，30，40 |
AlN |
Al（oxidation） | RFTXXN-10TA1413-6 | ||
|
DC-12.4 |
7.15 |
6.5 |
01-10，15，20，25，30 |
BeO |
Al（oxidation） | RFTXX-10TA7265-12.4 | |
|
DC-18.0 |
7.35 |
10.2 |
01-10，15，20，25，30，40，50 |
BeO |
Al（Conductive oxidation） | RFTXX-10TA7310-18 | |
|
20 |
DC-6.0 |
7.4 |
22.9 |
01-10，15，20，25，30，40，50 |
AlN |
Al（oxidation） | RFTXXN-20TA7423-6 |
|
DC-10.0 |
14.0 |
19.2 |
01-10，15，16.5，20，25，26.5，30，40，50 |
BeO |
Al（Conductive oxidation） | RFTXX-20TA1419-10 | |
|
DC-18.0 |
7.35 |
22.2 |
01-10，15，20，25，30，40，50，60 |
BeO |
Al（Conductive oxidation） | RFTXX-20TA7322-18 | |
|
30 |
DC-10.0 |
14.0 |
32.2 |
01-10，15，20，25，30，40，50，60 |
BeO |
Al（Conductive oxidation） | RFTXX-30TA1432-10 |
|
50 |
DC-6.0 |
14.0 |
40.2 |
01-10，15，16.5，20，25，30，40，50，60 |
BeO |
Al（Conductive oxidation） | RFTXX-50TA1440-6 |
|
DC-8.0 |
14.0 |
40.2 |
01-10，15，16.5，20，25，30，40，50，60 |
BeO |
Al（Conductive oxidation） | RFTXX-50TA1440-8 | |
Overview
This sleeve type attenuation chip is an important component of a coaxial fixed attenuator. Select the corresponding size based on different frequencies and power requirements. Add a suitable size heat sink to it and assemble it into the required coaxial attenuator through connectors.
Our company provides and sells sleeve attenuation chips with power ranging from 2W to 50W, including commonly used 3G, 6G, 8G, 12.4G, and 18G frequencies. Users can choose according to their own needs. If the products in the table above cannot meet your needs, you can also contact our sales personnel to provide detailed information on your requirements for special customization.
Sleeve type attenuation chip refers to a spiral microstrip attenuation chip with a specific attenuation value inserted into a metal circular tube of a specific size (the tube is generally made of aluminum material and requires conductive oxidation, and can also be plated with gold or silver as needed).
The materials used for attenuation chips mainly include alumina, aluminum nitride, and beryllium oxide ceramic substrates. The selection of substrate material and size is mainly based on the required frequency and power for design selection.
Our company mainly introduces this sleeve type attenuation chip to facilitate customer selection and assembly use. It eliminates the need for customers to redesign and process the sleeve after purchasing a single chip, saving time and cost.
This sleeve type attenuation chip is an important component of a coaxial fixed attenuator. Select the corresponding size based on different frequencies and power requirements. Add a suitable size heat sink to it and assemble it into the required coaxial attenuator through connectors.
Our company provides and sells sleeve attenuation chips with power ranging from 2W to 50W, including commonly used 3G, 6G, 8G, 12.4G, and 18G frequencies. Users can choose according to their own needs. If the products in the table above cannot meet your needs, you can also contact our sales personnel to provide detailed information on your requirements for special customization.
