-
RFTYT Replacement for 5mm SMD Isolator
Today RFTYT recommend a SMD isolator with a size of only 5mm. The advantages of this product as below: 1.Miniaturization, with a size of only 5mm 2.Localization. All materials and components are produced by RFTYT 3.Completely replaceable, circuit board does not need to b...Read more -
WH6466E VHF RF LC Drop in Circulator
RF drop in circulators are non reciprocal devices whose signals enter from the first port Tx(transport) and output from the second port Antenna. At the same time, the signal enters from the second port Antenna and outputs from the third port RX(receive). Usually used for...Read more -
DC-8GHz RF 100W Coaxial Fixed Attenuator
Coaxial fixed attenuators are generally composed of connectors (usually SMA, N, 4.3-10, DIN, etc.), attenuation chips or chipsets (which can be divided into flange type: usually selected for use in lower frequency bands, micro strip type can achieve higher frequency), h...Read more -
New product launch -500W Portable RF Coaxial Fixed Attenuator
Recently, RFTYT launched a 500W Portable RF Coaxial Fixed Attenuator with a frequency of DC-3.0GHz, VSWR of 1.35Max, and attenuation value of 40dB. The specific parameters and dimensions are as follows: Specs: Model RFT40-500FF1440-NK-3 Frequ...Read more -
WG4027X RF Dual Junction Drop in Isolator Isolator
Dual junction isolator-isolator is an electronic device commonly used in RF systems, with the main function of isolating RF signals. It has the following characteristics: 1.Unidirectional transmission: The signal can be smoothly transmitted from TX(transport) port to Ant...Read more -
RF 2-4GHz UHF SHF RF Coaxial Broadband Isolator
RFTYT has a coaxial isolator with forward power of 150W and reverse power of 20/100W. The specs of this product with insertion loss dB (max) 0.5, isolation dB (min) 18, and VSWR 1.3. The specific parameters and size diagram are as follows: Specs:...Read more -
100W RF Dummy Load
100W RF coaxial fixed termination is a device used to absorb power from RF or microwave systems, which can serve as a dummy load for antennas or as a terminal for transmitters. RFTYT launched a 100W RF Coaxial Fixed Termination with a frequency of DC-3.0GHz, VSWR of 1.20...Read more -
800-2000MHz (Full band) UHF RF Broadband Circulator
Today RFTYT going to share some common features and applications of 800-2000MHz RF broadband circulators: 1.Bandwidth: The bandwidth range of 800-2000MHz enables it to cover various communication and wireless technology frequency bands. 2.Isolation: The isolation of a RF...Read more -
RF Long Round Type 200W Coaxial Fixed Attenuator
Coaxial fixed attenuator is a commonly used passive device in RF and microwave systems, used to fixedly reduce the power of transmitted signals. Working principle: It mainly absorbs some RF energy through internal resistive materials, thereby achieving attenuation of sig...Read more -
RFTYT 200W Coaxial Fixed Attenuator
Coaxial fixed attenuator is an energy dissipating RF/microwave component that contains resistive materials inside. It can be used within a given frequency range to attenuate the power of the input signal. The basic material that constitutes a coaxial fixed attenuator is...Read more -
2.0-6.0GHz RF Drop in Isolator
Today we recommend a strip line (TAB) isolator with forward power of 50W and a reverse power of 20W, and dimensions is 30.5 * 30.5 * 15.0mm Characteristics of this isolator: 1.Good temperature stability: able to withstand large temperature changes without affecting its n...Read more -
RF Dual Junction SMA Coaxial Isolator-Circulator
As we know RF Dual Junction SMA Coaxial Isolator-Circulators are widely used in communication, radar, satellite communication, electronic countermeasures and other fields, such as: 1. Communication system: used to isolate signals from different frequency bands or channel...Read more
