-
RFT50-100CT6363 DC~5.0GHz RF Termination
Typical Performance: Installation method Power De-rating Reflow time and temperature diagram: P/N Designation Matters needing attention ■ After the storage period of newly purchased parts exceeds 6 months, attention should be paid to their weldability before use. It is recommended to store in vacuum packaging. ■ Drill out the hot hole on the PCB and fill the solder. ■ Reflow welding is preferred for bottom welding, please refer to Reflow introduction ■ The manual welding wire should be use... -
Coaxial Isolator
RF coaxial isolator is a passive device used to isolate signals in RF systems. Its main function is to effectively transmit signals and prevent reflection and interference.The main function of RF coaxial isolators is to provide isolation and protection functions in RF systems.In RF systems,some reverse signals may be generated, which may have a negative impact on the operation of the system.RF coaxial isolators can effectively isolate these reverse signals and prevent them from interfering with the transmission and reception of the main signal.The working principle of RF coaxial isolators is based on the irreversible behavior of magnetic fields.The basic structure of a coaxial circulator consists of a coaxial connector, a cavity, an inner conductor, a ferrite rotating magnet, and magnetic materials.
Can be dual junction even three for high isolation.
Military, space and commercial applications.
Custom design available upon request.
Guaranteed for one year standard.
-
Coaxial Circulator
Coaxial circulator is a passive device used in the RF and microwave frequency bands, often used in isolation, directional control, and signal transmission applications. It has the characteristics of low insertion loss, high isolation, and wide frequency band, and is widely used in communication, radar, antenna and other systems.The basic structure of a coaxial circulator consists of a coaxial connector, a cavity, an inner conductor, a ferrite rotating magnet, and magnetic materials.
Frequency range 10MHz to 50GHz, up to 30KW power.
Military, space and commercial applications.
Low insertion loss, high isolation, high power handling.
Custom design available upon request.
-
-
Chip Attenuator
Chip Attenuator is a micro electronic device widely used in wireless communication systems and RF circuits. It is mainly used to weaken the signal strength in the circuit, control the power of signal transmission, and achieve signal regulation and matching functions.
Chip attenuator has the characteristics of miniaturization, high performance, broadband range, adjustability, and reliability.
Custom design available upon request.
-
2.0 to 6.0GHz Microstrip Circulator MH1515-10 Strip Line Type
2.0 to 6.0GHz Microstrip Circulator Basic Specifications：
Freq. Range GHz: 2.0-6.0
IL. dB max: 1.5
Isolation dB min: 10
VSWR max: 1.8
Forward Power CW: 50
Impedance: 50 Ω
Connector Type: Micro strip
Size: 15.0mm*15.0mm*3.5mm
Operating Temp: -55~+85℃
-
RFT50-500WT1313 DC~2.0GHz RF Termination
Typical Performance: Installation method Power De-rating Reflow time and temperature diagram: P/N Designation Matters needing attention ■ After the storage period of newly purchased parts exceeds 6 months, attention should be paid to their weldability before use. It is recommended to store in vacuum packaging. ■ Drill out the hot hole on the PCB and fill the solder. ■ Reflow welding is preferred for bottom welding, please refer to Reflow introduction ■ The manual welding wire should be use... -
RFT50-100TM2595 DC~3.0GHz RF Termination
Typical Performance: Installation method Power De-rating P/N Designation Matters needing attention ■ After the storage period of newly purchased parts exceeds 6 months, attention should be paid to weldability before use. It is recommended to store in vacuum packaging. ■ The ground requires optimal heat transfer. ■ Manual welding should be used under a constant temperature soldering iron of no more than 350 degrees, and the welding time should be controlled within 5 seconds. ■ In order to m... -
-
-
-
