-
Band Stop Filter
Band-stop filters have the ability to block or attenuate signals in a specific frequency range, while signals outside that range remain transparent through.
Band-stop filters have two cutoff frequencies, a low cutoff frequency and a high cutoff frequency, forming a frequency range called the “passband”. Signals in the passband range will be largely unaffected by the filter. Band-stop filters form one or more frequency ranges called “stopbands” outside the passband range. The signal in the stopband range is attenuated or completely blocked by the filter.
-
Chip Termination
Chip Termination is a common form of electronic component packaging, commonly used for surface mount of circuit boards. Chip resistors are one type of resistor used to limit current, regulate circuit impedance, and local voltage.Unlike traditional socket resistors, patch terminal resistors do not need to be connected to the circuit board through sockets, but are directly soldered to the surface of the circuit board. This packaging form helps to improve the compactness, performance, and reliability of circuit boards.
-
Coaxial Mismatch Termination
Mismatch Termination also called mismatch load which is a type of coaxial load.It is a standard mismatch load that can absorb a portion of microwave power and reflect another portion, and create a standing wave of a certain size, mainly used for microwave measurement.
-
Leaded Termination
Leaded Termination is a resistor installed at the end of a circuit, which absorbs signals transmitted in the circuit and prevents signal reflection, thereby affecting the transmission quality of the circuit system.Leaded Terminations are also known as SMD single lead terminal resistors. It is installed at the end of the circuit by welding. The main purpose is to absorb signal waves transmitted to the end of the circuit, prevent signal reflection from affecting the circuit, and ensure the transmission quality of the circuit system.
-
RFTYT 3 Way Power Divider
The 3-way power divider is an important component used in wireless communication systems and RF circuits. It consists of one input port and three output ports, used to allocate input signals to three output ports. It achieves signal separation and power distribution by achieving uniform power distribution and constant phase distribution. It is generally required to have good standing wave performance, high isolation, and good in band flatness.
Custom design available upon request.
-
RFTYT 4 Way Power Divider
The 4-way power divider is a common device used in wireless communication systems, consisting of one input and four output terminals.
-
RFTYT 6 Ways Power Divider
The 6-way power divider is a widely used RF device in wireless communication systems. It consists of one input terminal and six output terminals, which can evenly distribute an input signal to six output ports, achieving power sharing. This type of device is generally designed using microstrip lines, circular structures, etc., and has good electrical performance and radio frequency characteristics.
-
RFTYT 8 Way Power Divider
The 8-Ways power divider is a passive device used in wireless communication systems to divide the input RF signal into multiple equal output signals. It is widely used in many applications, including base station antenna systems, wireless local area networks, as well as military and aviation fields.
-
RFTYT 10 Ways Power Divider
The power divider is a passive device widely used in RF systems, which is used to divide a single input signal into multiple output signals and maintain a relatively constant power distribution ratio. Among them, a 10 channel power divider is a type of power divider that can divide an input signal into 10 output signals.
-
RFTYT 12 Way Power Divider
The power divider is a common microwave device used to distribute input RF signals to multiple output ports in a certain power ratio. The 12 ways power divider can equally divide the input signal into 12 wayss and output them to the corresponding ports.
-
Chip Resistor
Chip resistors are widely used in electronic devices and circuit boards. Its main feature is that it is mounted
directly on the board by surface mount technology (SMT), without the need to pass through perforation or solder pins.Compared to traditional plug-in resistors, chip resistors have a smaller size, resulting in a morecompact board design.
-
Leaded Resistor
Leaded Resistors, also known as SMD two lead resistors, are one of the commonly used passive components in electronic circuits, which have the function of balancing circuits. It achieves stable operation of the circuit by adjusting the resistance value in the circuit to achieve a balanced state of current or voltage. It plays an important role in electronic devices and communication systems.The leaded resistor is a type of resistor without additional flanges, which is usually installed directly on a circuit board through welding or mounting. Compared to resistors with flanges, it does not require special fixing and heat dissipation structures.
