-
A6 RF Variable Attenuator RF Attenuator
specs Model Freq. Range Attenuation & VSWR Insertion Loss Attenuation Tolerance GHz Step (max) dB（max） dB RKTXX-2-69-8.0-A6 DC-8.0 0-69dB 1dB Step 1.5 1 ±0.5dB(0～9dB) ±1.0dB(10～19dB) ±1.5dB(20～49dB) ±2.0dB(50～69dB) RKTXX-2-69-12.4-A6 DC-12.4 1.6 1.25 ±0.8dB(0～9dB) ±1.0dB(10～19dB) ±1.5dB(20～49dB) RKTXX-2-69-18.0-A6 DC-18.0 1.75 1.5 ±2.0dB(50～69dB) RKTXX-2-69-26.5-A6 DC-26.5 2 2 ±1.5dB(0～9dB) ±1.75dB(10～19dB) ±2.0dB(20～49dB) ±2.5dB(50～69dB) RK... -
RFTXX-05TA7265-18 Microstrip Attenuator With Sleeve RF Attenuator
Outline Drawing (Unit: mm/inch) Diameter tolerance: ±0.05, length tolerance: ± 0.05 Typical Performance: 3dB Graph 6dB Graph 20dB Graph 5dB Graph 10dB Graph 30dB Graph Use Attention Power De-rating P/N Designation Notes ■ The sleeve and radiator need to be tightly connected to ensure heat dissipation. ■ Good grounding is required to ensure S parameters. ■ In order to meet the requirements of the drawings,it is necessary to install radiators of sufficien... -
RFTXXA-02TA7265-12.4 Microstrip Attenuator With Sleeve RF Attenuator
Outline Drawing (Unit: mm/inch) Diameter tolerance: ±0.05, length tolerance: ± 0.05 Typical Performance: 1dB Graph 3dB Graph 5dB Graph 7dB Graph 9dB Graph 20dB Graph 2dB Graph 4dB Graph 6dB Graph 8dB Graph 10dB Graph 30dB Graph Installation method Power De-rating P/N Designation Attention ■The cavity and heat sink need to be tightly connected to ensure heat dissipation ■ Good grounding is required to ensure S parameters ■ In order to meet the requirements of the drawings, a radi... -
RFTXX-05MA5263-12.4 Microstrip Attenuator RF Attenuator
Outline Drawing (Unit: mm/inch) Note: 1.If the customer needs, we can provide with the dimension of the air hood Typical Performance: 1dB Graph 3dB Graph 10dB Graph 20dB Graph 2dB Graph 5dB Graph 15dB Graph 30dB Graph Installation method Power De-rating P/N Designation Attention ■The cavity and heat sink need to be tightly connected to ensure heat dissipation ■ Good grounding is required to ensure S parameters ■ In order to meet the requirements of the drawings, a radiator of suffic... -
RFTXXA-02MA4463-18 Microstrip Attenuator RF Attenuator
Outline Drawing (Unit: mm/inch) Note: 1.This size is limited to 15-30dB. For smaller attenuation values, The length of 6.35 will be reduced to 3.0 2.If the customer needs, we can provide with the dimension of the air hood Typical Performance: 20dB Graph 30dB Graph Installation method Power De-rating P/N Designation Attention ■The cavity and heat sink need to be tightly connected to ensure heat dissipation ■ Good grounding is required to ensure S parameters ■ In order to meet the requireme... -
RFTXX-1000FF3849-DINK-3 Coaxial Fixed Attenuator RF Attenuator
Naming rules Power De-rating Graph Use attention 1、Dimensions Tolerance ±3%; 2、If necessary, the product shall be air-cooled for auxiliary heat dissipation； 3、Custom designs available of other special coaxial fixed attenuator； 4、Pay attention to the direction of the product during use and strictly prohibit reverse connection. -
RFTXX-50RA3873-SMA-8 Coaxial Fixed Attenuator RF Attenuator
Outline Drawing (Unit: mm/inch) The connector could be changed to SMA-M to SMA-M or SMA-F to SMA-F Naming rules Power De-rating Use attention 1、Dimensions Tolerance ±3%; 2、If necessary, the product shall be air-cooled for auxiliary heat dissipation； 3、Custom designs available of other special coaxial fixed attenuator； 4、Pay attention to the direction of the product during use and strictly prohibit reverse connection. -
RFTXX-10AM7750B-4 Flanged Attenuator RF Attenuator
Outline Drawing (Unit: mm/inch) Lead length can be customized according to customer requirements Dimensional tolerance: 5% unless otherwise stated Typical Performance: 0.5dB Graph 7dB Graph 3dB Graph 11dB Graph Installation method Power De-rating P/N Designation Use attention ■ After the storage period of newly purchased parts exceeds 6 months, attention should be paid to weldability before use. It is recommended to store in vacuum packaging. ■ The ground needs optimal heat transfer. ■... -
RFTXXA-05AM1104-3 Flanged Attenuator RF Attenuator
Outline Drawing (Unit: mm/inch) Lead length can be customized according to customer requirements Dimensional tolerance: 5% unless otherwise stated Typical Performance: 5dB Graph 20dB Graph Installation method Power De-rating P/N Designation Notice ■ After the storage period of newly purchased parts exceeds 6 months, attention should be paid to weldability before use. It is recommended to store in vacuum packaging. ■ The ground needs optimal heat transfer. ■ The manual welding lead should... -
RFTXX-30AM0606-6 Leaded Attenuator RF Attenuator
Outline Drawing (Unit: mm/inch) Lead length can be customized according to customer requirements Dimensional tolerance: 5% unless otherwise stated Typical Performance: 3dB Graph 20dB Graph 6dB Graph 30dB Graph Installation method Power De-rating Reflow Profile P/N Designation Notice ■ After the storage period of newly purchased parts exceeds 6 months, attention should be paid to weldability before use. It is recommended to store in vacuum packaging. ■ The ground needs optimal heat tran... -
RFTXX-10AM2505B-4 Leaded Attenuator RF Attenuator
Outline Drawing (Unit: mm/inch) Lead length can be customized according to customer requirements Dimensional tolerance: 5% unless otherwise stated Typical Performance: 0.5dB Graph 7dB Graph 3dB Graph 11dB Graph Installation method Power De-rating Reflow Profile P/N Designation Notice ■ After the storage period of newly purchased parts exceeds 6 months, attention should be paid to weldability before use. It is recommended to store in vacuum packaging. ■ The ground needs optimal heat tra... -
RFTXXN-10CA5025C-3 Chip Attenuator RF Attenuator
Typical Performance: 2dB Graph 20dB Graph 6dB Graph 30dB Graph Installation method Power De-rating Reflow soldering time & Temperature diagram P/N Designation Notice ■ After the storage period of newly purchased parts exceeds 6 months, attention should be paid to their weldability before use. It is recommended to store in vacuum packaging. ■ Drill out the hot hole on the PCB and fill the solder. ■ Reflow welding is preferred for bottom welding, please refer to Reflow introduction ■ I...
