products

Products

RFTXX-30AM0606-6 Leaded Attenuator RF Attenuator


  • Model: RFTXX-30AM0606-6 (XX=Attenuation value)
  • Impedance: 50 Ω
  • Frequency Range: DC~6.0GHz
  • VSWR: 1.25 max
  • Rated Power: 30 W
  • Attenuation Value(dB): 01-10dB/15、20dB/25、30dB
  • Attenuation Tolerance(dB): ±0.6dB/±0.8dB/±1.0dB
  • Temperature coefficient: <150ppm/℃
  • Substrate Material: BeO
  • Porcelain Hat Material: Al2O3
  • Lead: 99.99% Sterling Silver
  • Resistance Technology: Thick Film
  • Operating Temperature: -55 to +150°C (See de Power De-rating)
  • Product Detail

    Product Tags

    Outline Drawing (Unit: mm/inch)

    kldfgs1

    Lead length can be customized according to customer requirements
    Dimensional tolerance: 5% unless otherwise stated

    Typical Performance:

    3dB Graph

    fgjdv1

    20dB Graph

    fgjdv3

    6dB Graph

    fgjdv2

    30dB Graph

    fgjdv4

    Installation method

    Power De-rating

    dsfgdf
    dfgf

    Reflow Profile

    sdfg

    P/N Designation

    dfgsd

    Notice

    ■ After the storage period of newly purchased parts exceeds 6 months, attention should be paid to weldability before use. It is recommended to store in vacuum packaging.
    ■ The ground needs optimal heat transfer.
    ■ The manual welding lead should be used under a constant temperature soldering iron of no more than 350 degrees, and the welding time should be controlled within 5 seconds.
    ■ In order to meet the drawing requirements, it is necessary to install a sufficiently large radiator. Metal surfaces and radiators need to be coated with a very thin layer of thermal grease.
    ■ If necessary, add air or water cooling.

    ◆ Instructions:
    ■ Custom designed RF attenuators, RF resistors and RF terminals are available.


  • Previous:
  • Next: