Note:
1.This size is limited to 15-30dB. For smaller attenuation values, The length of 6.35 will be reduced to 3.0
2.If the customer needs, we can provide with the dimension of the air hood
■The cavity and heat sink need to be tightly connected to ensure heat dissipation
■ Good grounding is required to ensure S parameters
■ In order to meet the requirements of the drawings, a radiator of sufficient size must be installed.
■ If necessary, add air or water cooling.
■ The connection between the connector and the attenuator should preferably be an elastic contact
◆ Instructions:
■ Custom designed RF attenuators, RF resistors and RF terminations are available.