Products
RFTXXN-10RM2550 Leaded Resistor RF Resistor
Outline Drawing (Unit: mm)
The length of lead wire can meet the customer's requirements
Suggested Stress Relief Methods
Power De-rating
Reflow Profile
P/N Designation
Use attention
■ After the storage period of newly purchased components exceeds 6 months, attention should be paid to weldability before use. Storage is recommended for storage after vacuum packaging.
■Forming a small loop in the tab will act as a strain relief as the heat is dissipated.
■ The best heat conduction is required on the ground surface.
■ Manual welding lead out should be used at or less than 350 degrees of constant temperature solder iron, welding time controlled in 5 seconds.
■ In order to satisfy the drawings, it is necessary to install a large enough radiator. The metal surface and radiator need to be coated with a very thin layer of thermal conductive silicone grease.
■ If necessary, add air cooling or water cooling.
Explain:
■ Custom designs available RF Attenuators and RF Resistors and RF Terminations.
